Setting Up Your Nearpow T319 Timer

1. Basic Setup

• Plug it in: Insert the Nearpow T319 timer into a standard electrical outlet.

• Connect your device: Plug your BloomBox pump into the timer's outlet.

2. Programming the Timer for Infinite Cycle

• Press the "SWITCH" button. This turns the timer ON and allows you to access the programming functions.

• Press "TIMING/CIRCULATE". This puts the timer into the programming mode for infinite cycle.

• Set the ON time:

  • Use the "MINUTE" button to set the ON duration in minutes.

• Press "TIMING/CIRCULATE" again. This moves you to set the OFF time.

• Set the OFF time:

  • Use the "MINUTE" button to set the OFF duration in minutes.

• Press "TIMING/CIRCULATE" again. This brings you to the "TIMER" setting.

• Set the timer to infinite:

  • Use the "MINUTE" button to set the timer to 00:00. This ensures the cycle repeats indefinitely.

• Press "CONFIRM". This saves your settings and activates the infinite cycle program.

• Lock the settings:

  • Press and hold the "CONFIRM" button and the "HOUR" button simultaneously for 3 seconds. This will lock the settings and prevent any accidental changes.

Example for your BloomBox:

To have your BloomBox pump run for 3 minutes and then turn off for 6 minutes, repeatedly, you would set:

• ON time: 3 minutes

• OFF time: 6 minutes

• Timer: 00:00

Important Notes:

• The Nearpow T319 has a built-in battery to retain settings during power outages.